This is a discussion on GDE Yearly cross country development trip within the Green Diesel Engineering forums, part of the Vendors category; Hi everyone, @ 04rcode - trans tunes will be available at the conclusion of our trip and after our flash tool gets updated with the ...
@ 04rcode - trans tunes will be available at the conclusion of our trip and after our flash tool gets updated with the new protocol for the 8HP.
@ roegs - yes we'll be running I-80 from Omaha back to Chicago and then on to our shop. We would propose to configure an ECU up front (new/blank as well) with the tune that you want and configured for your vehicle, then swap it for your blank one. That way it's a 20min exchange (if installing for you too) instead of an hour spent to go thru all the motions. If you want to meet up send us an email so we can work out the particulars of where and when that day.
@ muthmandoo - yes, we'll be running I-55 from Chicago on down to Springfield.
To the rest - unfortunately going into California with M-plated vehicles means we have to fill out a lot of paperwork...maybe one day in the future, but not today.
WHAT no Kansas City?????
GDE-When you say the trans tune will be available at the end of the trip, does that mean upon your return in September? Or will it possibly be available on Aug 30 in Omaha? I'm in Omaha.
Sent from my SM-G900V using Tapatalk
2015 RAM 1500 3.0L EcoDiesel/8HP70 4x4. QC 6'4' 140" WB. Factory options: Protection Group, Exterior Appearance Group, Trailer Tow Mirror and Brake Control Group, Popular Equipment Group, 3.92, Anti-Spin, UConnect 5.0, ParkView
List of mods - DJL_57'S RAM
2015 RAM Bighorn 1500 Ecodiesel 4X4 Crew Cab
20" Wheels w/BFGoodrich A/T KO2 LT285X65R20
G4 Elite Fold-a-Cover w/storage bin
AMP Research PowerStep running boards
Bilstein 5100 Series Shocks front/back 2.8”
Mevotech Upper Control Arms
Total Load Control 9" Air Springs
AirLift WirelessAir 72000 Air Compressor System
Edge Insight CTS2
Was as in past tense?